[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Re EDP loosing MIDI Clock sync - Quest



It would be worthwhile trying the merge box as the 1010's Through
is know to be iffy. There's an alternate operating system that you
can read about & order through the FCB1010 Yahoo group that is
supposed to improve the Through and many other elements.

Cheers,
Scott M2

http://www.dreamSTATE.to
ambientelectronicsoundscapes
http://www.THEAMBiENTPiNG.com


> Luis
>
> are you really sure of the quality off the soft thru off the behringer
> footped ?? before going after the edp again ...
>  it took me 20 sec to make a search on the fcb yahoo group (soft thru) to
> find some post complaining  about the merge function
>
> and you go with midi clock thru the fcb while banging whatever edp
> functions
> and complaining the edp looses sync "sometimes" after a while.
> quote
> I was doing a lot of multiplying,inserting,replacing and
> re-recording and it would stay synced for the most
> part but after a while it would start drifting
> unquote
>
> please get a "real" merge box then describe exactly what you pressed then
> we
> can perhaps understand what happened
>
> Claude
>
>
>
>
>
>
> ----- Original Message -----
> From: "Luis Angulo" <labalou2000@yahoo.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Sunday, December 04, 2005 1:05 PM
> Subject: Re: Re EDP loosing MIDI Clock sync - Quest
>
>
> Hi Kim,
> Here is how i have the devices hooked up:
> (this might not relate to auto record)
> MPC1000 sampler midi out into FCB1010 midi in then its
> midi out into EDP midi in.The FCB1010 controller shows
> a blinking dot when receiving midi clock from the
> MPC1000 i assume and the EDP was responding as well.I
> was doing a lot of multiplying,inserting,replacing and
> re-recording and it would stay synced for the most
> part but after a while it would start drifting.I am
> still wondering about this because i tried this at
> home again and let a loop run for a long time and
> didnīt notice any problems...
> cheers
> Luis
>
>
>
> --- Kim Flint <kflint@loopers-delight.com> wrote:
>
>> At 01:48 AM 12/2/2005, Luis Angulo wrote:
>> >Yes,there is indeed a problem with it, i did a show
>> on
>> >Saturday where we improvised spontaneously music to
>> >pictures and paintings which were being manipulated
>> >with software.This is the first time i slave the
>> EDP
>> >to my MPC1000 and i had to constantly trigger the
>> >reAlign function to keep the loops synced,i didnīt
>> do
>> >any loop copy or auto record,just simply recorded
>> to
>> >the running grooves of the MPC and it still
>> >happened.As a master the EDP works flawlesly
>> though.
>>
>> Luis,
>>
>> The problem we are talking about here only relates
>> to using AutoRecord with
>> sync=in, and has the easy fix of using LoopCopy=time
>> instead of AutoRecord.
>> If you were not using AutoRecord, then I don't think
>> you were having the
>> same issue Per is talking about. There isn't any
>> known issue with normal
>> use of sync in from midi clock - that should work
>> fine. You would have to
>> give a better explanation of your problem/setup for
>> us to help you.
>>
>> kim