[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Line6 Echo Pro & MIDI lag



Thanks for the great replies everyone.  In this case Bob wins the
prize.  I failed to mention that between my FCB and the EchoPro lay a
bohemoth by the name of Digitech 2120.  The lag was apparently in the
output of the 2120 as reversing the order of the two devices
(FCB->EP->2120) now delivers instantaneous response from the EP.  In
fact I would have written this message sooner, but I was too busy
grooving over a loop in 5/4.  Delicious.

This has revealed, however a bit of lag in the EP's MIDI THRU to the
2120.  I think this will be tolerable, though since all I'm doing is
changing patches & flipping the occasional effect on & off.  Might be
a problem using the FCB's CC pedals on things like wah or whammy, but
we'll see.  I suppose if it does become irritating I could purchase a
dedicated MIDI splitter.

Thanks again everyone.  I'm now in a new looping bliss with a
Boomerang, Vortex, and now a properly responding EchoPro.  :)

Todd


On 12/15/05, Bob Amstadt <bob@amstadt.com> wrote:
> Ok, here is the big question.  What is in the complete MIDI chain and how
> is everything wired?  If the FCB1010 is connected directly to the EchoPro
> without any other MIDI devices connected to the two units, does this
> problem still exist?  If it does, I suspect that something is broken,
> because there is no inherent reason why the lag should exist.
>
> --On Thursday, December 15, 2005 1:18 PM -0800 Luis Angulo
> <labalou2000@yahoo.com> wrote:
>
> > todd that is strange, i had an echo pro at one point
> > which i was controlling with my FCB1010 and as far as
> > i remember it worked wonderful with no latency...
> > hello midi gurus?
> >
> > --- Todd Pafford <calenlas@gmail.com> wrote:
> >
> >> Hey all,
> >>
> >> With all this talk about latency and recent mention
> >> of the Line6 Echo
> >> Pro, I thought I'd pose a question to the group.
> >> I've noticed that in
> >> controlling my Echo Pro with my FCB1010 MIDI pedal,
> >> there's a wicked
> >> lag for the Echo Pro to respond to MIDI commands.
> >> Makes it nearly
> >> impossible to set accurate loop points, etc.  Has
> >> anyone else noticed
> >> this with their Echo Pros?  Really, I'm just curious
> >> as I doubt
> >> there's anything that can be done about it.
> >>
> >> Todd
> >>