Re: midimate again, cc values

[Travis Hartnett <travishartnett@gmail.com>]

Oh, and don't forget to press "Store" at the end (button 4) of all
that.  Once you've defined button 5 as CC 11=105, you need to have
button five "on" when you're in PC 5, then press "Store".  You'll see
"STORED" scroll across the display, and subsequent PC 5 messages
should include the CC11=105.

TravisH

On 12/30/05, Travis Hartnett <travishartnett@gmail.com> wrote:
> Whoops, I'm wrong.  If you're in Controller mode, you can send CC
> messages with the program changes.  For PC 5 + CC11=105 I think
> this'll do it:
>
> Press the Access button until "Controller" LED lights.
> Press "2nd" button.  Use the Bank Adjust buttons to select PC 5
> Press the "2nd" button, then press the 5 or 6 button until "Controller
> Assignment"
> Press the "6" button until "BTN5 OFF" appears.  Now you need to assign
> Button 5 to CC 11.  Press the "1" button until the display reads "BTN5
> 11".
> Now we'll assign CC 11 the default value of 105.  Press the "6" button
> until "Programmable Changes" appears.
> Press the "6" button until "SET5 OFF" appears.  Press the "0" button
> until the display reads "SET5 105" (you can use the "1" button, but it
> takes longer to go up to 105...).
> Press the "2nd" button to take you out of edit mode.
>
>
> TravisH
>
>
> On 12/30/05, Zoe Keating <cello@zoekeating.com> wrote:
> > I'm fed up with the gargantuan size of my FCB1010 and am testing new
> > midi pedals to use with Monsieur RPTR.
> > The Ground Control & All Access are too big in their own ways. How
> > would I reach the 3rd row? And so heavy! The Rocktron MidiMate looked
> > like the right size and the advertised specs looked right. (and so
> > small! so darling! it fits so neatly in my suitcase!! )
> >
> > I cockily thought...."Well, I've mastered programming of the FCB1010.
> > Mapping my patches over to the MidiMate will be a breeze...."
> >
> > SILLY ME.
> >
> > Does anyone out there use one? I've just wasted a few hours trying to
> > crack this thing.
> >
> > I simply need to send simultaneous messages. For example:
> >
> > PC 5 + CC 11 value 105
> >
> > I am fine setting the PC messages. How do I assign values to the CC
> > messages??? I'm stumped!
> >
> >  From everything I read online, I assumed the pedal would do this.
> > But now I'm suspecting that it does not....
> >
> > anyone ever use one?
> >
> > thanks much, z
> >
> >
> >
>