[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: EDP and StylusRMX
So, if StartSong commands just start the sequencer, and the following
frequncies of the midi clock determines the tempo- with Sonar as slave, the
tempo should change as it receives new tempo information as I mess with the
loop, no?
I am trying to figure out new ways to work with my EDP, and getting a
handle
on the sequencer/EDP relationship is a huge part. I got the 'EDP as Slave'
thing figured out, but acting as the master has been a bit difficult. I
have
tried so far in Tracktion as well as Sonar.
Dave Eichenberger
http://www.hazardfactor.com
>
> >Does StartSong contain tempo
> >info, or does it just, um, start the sequencer?
>
> MIDI StartSong command means "start the sequencer at the next
> MIDI clock command". It doesn't have any tempo info. Tempo is
> then defined by the frequency of the following MIDI clock commands.
>
> You might also find the various ReAlign and Tempo type
> commands in LoopIV interesting. Many of them were designed
> just for working with sequencers like you are doing.