[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Controlling 2 EDPs with one Foot Controller??
I'm using two EDPs. I ditched the stock footcontoller and use a FCB1010 for
both. I have mine sync'd togther for stereo so each is one the same midi
channel however it would be a simple matter to run them on separate midi
channels.
Craig
on 2/7/06 4:28 PM, Kris Hartung at khartung@cableone.net wrote:
> hi Joe -
>
> It could have been me. I have a MIDI Thru split box that splits one MIDI
> input into two MIDI THRU outputs. I went from my Behringer into the box,
>and
> then out with two MIDI cables into each EDP. But I found it easier to
>just
> go from one EDP MIDI Out to the MIDI in of the other unit. It's called a
> "MIDI Solutions Thru" box.
>
> http://www.midisolutions.com/products.htm
>
>
> Kris
>
>
> ----- Original Message -----
> From: "joe rut" <joerut@lycos.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Tuesday, February 07, 2006 2:16 PM
> Subject: Controlling 2 EDPs with one Foot Controller??
>
>
> I currently use 2 EDPs, each with dedicated stock foot controller. I
>seem
> to recall someone saying they used one controller with 2 EDPs, with an
>a/b
> box to control which EDP is seeing signal from the foot controller.
>
> Anyone out there try this? Any issues with false triggerings,
>glitches,etc.
> when switching?
>
> I'd love to pare down my rig to a more reasonable chunk of stage real
> estate, and this would save some floor space if it was reliable.
>
> Thanks
>
> Joe Rut
>