[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Controlling 2 EDPs with one Foot Controller??
Sorry Joe, I misunderstood your original post. I responded with the MIDI
solution. But my response would be similar. You can controll two EDPs with
one stock conroller, just hook the two EDPs together with a short MIDI
cable.
But if you wanted to try a splitting solution, I suppose you could try out
one of those 1/4 inch splitter boxes that are active to keep the output up
to par. Who knows? This seems like more wires to worry about though.
Kris
----- Original Message -----
From: "David Morton" <dmorton@gmail.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Wednesday, February 08, 2006 3:05 AM
Subject: Re: Controlling 2 EDPs with one Foot Controller??
On 2/7/06, joe rut <joerut@lycos.com> wrote:
> I currently use 2 EDPs, each with dedicated stock foot controller. I
>seem
> to recall someone saying they used one controller with 2 EDPs, with an
>a/b
> box to control which EDP is seeing signal from the foot controller.
You definitely didn't dream it, I recall reading that message too.
I keep meaning to do the same experiment, since I use the same setup as
you.