Re: Hardware Sequencer Suggestions

[rick <bs@tanawana.com>]

Reading the manual on this one now actually. Very nice.
Essentially a QY100 with much more control.

Where I get unsure is can you switch between pattern/loops/ via
footswitch or midi foot controller with these?? The manual on the QY100
says you can with a foorswitch, but it only scrolls forward and not
backward it appears. Only hitch I can see so far for my uses.



On Wed, Mar 08, 2006 at 04:08:14PM +0000, Fluke wrote:
> Hi Rick,
> 
> The old Yamaha QY700 is still the Daddy of all hardware sequencers in my
> opinion, but whether it can do what you want - you will have to read the
> manual. The QY100 is derived from the QY700, so it is likely to present 
>you
> with the same limitations, although in a much larger and more user 
>friendly
> box.
> 
> Nik
> 
> --------- Original Message --------
> From: Loopers-Delight@loopers-delight.com
> To: "Loopers-Delight@loopers-delight.com"
> <Loopers-Delight@loopers-delight.com>
> Subject: Hardware Sequencer Suggestions
> Date: 08/03/06 15:00
> 
> 
> 
> I'm looking for some advice to replace my laptop setup with a hardware
> sequencer if possible.
> 
> The "basics" of my looping is done with acoustic guitars and echoplex,
> along with various sound modules for bass, drums, keys fed by the
> computer which contains a large amount of short midi clips I call
> up or shut off through a midi foot controller.
> 
> So basically I'm looking for a sequencer to store and call up midi loops
> at will, through a foot controller. Sounds aren't important due to my
> sound modules. It's more about live performance control being able to
> turn on and off or switch loops or multiple loops, etc.
> 
> Last 2 I checked out were an MPC1000 and a Yamaha QY100 which both were
> close but had limitations to them. Before I read another manual I
> thought I'd ask here.
> 
> Thanks ---> rick :O)
> 
> ________________________________________________
> Message sent using UebiMiau 2.7.2
>