[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP Feedback and Volume Pedal
Greetings from Illinois, land of tornadoes.
I think you are using the wrong kind of pedal. I believe the EDP expects a
liner
"expression" type pedal, like the Roland EV-5. These pedals are not
intended to
process audio directly, but simply to provide a voltage to a synth or some
other
piece of equipment for control of some parameter. They typically have one
1/4"
output cable with a stereo jack.
The Ernie Ball pedals have two jacks, input and output, and are intended to
process audio signals directly. If you connect one of these jacks to an
input
expecting an expression pedal, you are going to get weird results.
Mark Smart
http://www.marksmart.net/
----- Original Message -----
From: "Kevin" <kevin@TheNettles.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Sunday, April 16, 2006 3:24 PM
Subject: EDP Feedback and Volume Pedal
> Hi,
>
> I'm having a little problem with the Ernie Ball volume pedal I have
> plugged into the Feedback jack at the back of the EDP. Whenever I
> adjust the feedback using the pedal, it seems to take a little while
> for the EDP to notice that I'm moving the pedal and adjust the
> feedback accordingly. I also notice that if I swoop the pedal a
> couple of times to get the feedback change noticed, there is also a
> accompanying swoop in the volume leve of the loop I'm recording. Has
> anyone else had this happen? If so, how did you deal with it?
>
> Thanks,
> Kevin
>
> The Nettles: Progressive and Exciting Celtic Music
> www.TheNettles.com
>