[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: FCB1010 Midi Channel HELP!



Hi Mark,

Unfortunately, it isn't possible to assign midi channels to individual 
banks, only to PCs, CCs and Notes as a whole (see 2.2.2 in the manual - 
provided you have the same manual). For example: PC1 = ch 4; PC2 = ch 
6; CC1 = ch 9 etc.

Cheers,

Nico


Am 07.05.2006 um 18:43 schrieb mark t:

> Just picked one of these up.  I have managed to program bank 0 for my
> EDP.  The manual is a little confusing,  let me get this straight,  it
> takes a whole bank to be able to use all 10 buttons with the EDP
> correct?  Like a preset is just one button so you got to set up all 10
> presets in a bank each sending a single MIDI note message to utilize
> this thing 10 buttons with the EDP right?
>
> Anyway I got bank 0 setup with the EDP.  I want to make bank 1 only
> send messages on MIDI channel 2 because I am using it to control Logic
> and dont want any confusion with the EDP or Logic recieving messages
> from there non designated bank.  Any ideas on how to globally change
> MIDI channel for an entire bank?  I did not find this info in the
> manual in a matter I could understand. Thanks.
>