[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RC-50 & Loop Decay
Hi folks
Here is an idea how Loop Decay with RC-50 _could_ possibly work.
(btw, I've just received my RC-50... can't wait to try it out tonight at
home... :-))
Just one question first: is it possible to switch via MIDI between
Play/Rec mode?
If yes, do you think something like this would work to implement Loop
Decay:
You need:
- RC-50
- Midi Sequencer that can send midi control messages
- Mixer
Preparation:
- Turn off tempo sync, guide etc. on RC-50
- Connect your midi sequencer & RC-50 via midi
- Setup your mixer
- send mixer out to RC-50 IN
- send RC-50 OUT to mixer
- connect your SOURCE signal (i.e. guitar) to mixer
- set level of guitar to 100% on mixer
- set level of RC-50 out on mixer to i.e. 80% (depending on desired
decay level)
- (On RC-50, make sure the input signal is not monitored back to mixer)
- Program your midi sequencer the following way:
- Loop i.e. 2x2bars on midi sequencer
- Adjust tempo accordingly
- First bar triggers: (stop all phrases &) Phrase1 Play & Phrase2 Record
- Second bar triggers: Phrase2 Play & Phrase 1 Record
Now, when you perform, the first two phrases of RC-50 should work as a
"PING PONG RECORDING". Thus, the loop would be moved from Phrase 1 to
Phrase 2 and each turn, the volume would be reduced - depending on the
feedback level you set on the mixer.
Additionally, you could have another Phrase3 that you could play or record!
So, do you think this will work? Of course this boils down to the question:
ARE YOU ABLE TO TRIGGER RECORDING or SWITCH BETWEEN RECORD/PLAY VIA MIDI
on the RC-50?
Best regards
Buzap
PS: Link to RC-50 manual:
http://www.roland.com/manuals/en/index_alpha.html#anchor_R
PPS: The "fade out" will not be of any use btw, since it just fades out
and stops the loop.
--
"Feel free" – 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail