[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EXPLAIN your 10th Anniversary Birthday 30 second tune
Happy birthday Loopers-Delight mode d'emploi
take the common "Happy birthday to you melody" playit thru the following
patch
A pair of EDP's that are set to moreloop 4 and delay mode.
the following EDP functions (loop trigg, susHalf/full speed,
susRev/forward,) are automated thru midi by a Clavia G2 patch.
this G2 patch is inpired by the traditional plain hunt four minim sequence
used by bell ringers in Great-Britain (search change ringing) or
http://www.nagcr.org/pamphlet.html
the G2 patch plays the following pattern towards the 4 loops set in the EDP
1: loop 1 full speed forward pan L
2: loop 2 half speed forward pan +20%
3: loop 3 full speed reverse pan -20%
4: loop 4 half speed reverse pan R
4 plain hunt sequence :
1 2 3 4
-------
2 1 4 3
2 4 1 3
4 2 3 1
4 3 2 1
3 4 1 2
3 1 4 2
1 3 2 4
1 2 3 4
as you play into this setup the notes are picked up by the loops and
played
back later
at another rythmical spot (sort of phrase reshuffling)
any sequencer can be programmed to do this automation setup but
the edp out goes thru the G2 where the panning is done. another very
specific part of this setup is a dynamic feedback regulator wich lowers
the
EDP feedback according to the input volume. This feedback regulator avoids
the loop beeing too full after a while and dynamic replaces ala vortex.
the recall of the right EDP midi message can be facilited with my EDP MIDI
Commands Spreadsheet
http://www.loopersdelight.com/tools/echoplex/echoplex.html
Claude Voit