[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Help needed w/echoplex ARRAY
Hehe. Yeah...the idea is obviously to sync them....not to just brag
about how many you have. :-)
This is for Todd Green. He does seminars with a jamman setup I built an
interface for years ago. He wants to get stereo and up the quality a
bit. MIDI clocks though aren't channel specific (just a good 'ol F8 hex
as I recall). I'll try it and see where we're at. -Bob
a k butler wrote:
> At 10:10 05/01/2007, you wrote:
>
>> I need to get this setup finished for a client who wants to run 8
>> echoplexes with 4 stereo sync'd channels basically.
>>
>> I think what is happening is..we're going to need some midi filtering
>> unless there is some way I'm missing to internally filter the start
>> recording messages :-). Because right now, when one starts, they all
>> start or some such thing. I have to get back to it and see where
>> we're going. It's been a few months but I need to find someone
>> before I dig into it again who has experience running both brother
>> sync and midi.
>> Thanks, -Bob Weigel 406-582-5849
>
>
> hi Bob,
> Put each pair on a different Midi Channel.
>
> If want to sync all the edps to the same timing then it's going to be
> a bit tricky to get that to work.
>
> The standard Brother-sync-Midi-linked configuration for a pair of edps
> won't work as a MIDI slave,
> as the slave of the pair won't sync until the master has finished
> recording a loop.
>
> So the first pair of edps could be the Master, with Brother sync and
> Sync=Out,
> the other 3 should have Sync=In
>
>
> Actually, I'd wonder if that many EDPs is actually necessary to
> achieve the desired musical result :-)
> ( I do full arrangements with just one pair )
>
> andybutler
> www.andybutler.com
>
>
>