[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Help needed w/echoplex ARRAY
At 03:33 AM 1/7/2007, a k butler wrote:
>>We designed the Echoplex to support this sort of use, it should work ok.
>
>It didn't work when I tried it ( at Mathon, with Matthias).
>
>I had my 2 edps Brother synced,
>both Sync=Out
there's your problem. If you are trying to receive clock, Sync=IN. (on
both
units). Why would you set it to Sync=out if you are trying to receive sync?
>I don't remember, as it was a while back and I didn't midi-sync again.
>...but I think I got around it by setting EDPs to Sync=In
>(may have taken out the brother sync)
no, that's what you are supposed to do. BrotherSync works just fine with
Sync=IN, Out, or OuS.
>Sync=In disables brother sync ( as far as I know)
nope. We designed it to support all these cases transparently.
>>There are other ways to sync as well. For example all the units could be
>>connected with BrotherSync, which allows any of them to set the tempo
>for
>>the others. This is especially nice for group or band situations.
>
>...but brother-sync is problematic for more than 1 EDP
>...isn't it?
only if you get up to maybe 12 or more. I forget what the limit is but
nobody ever reached it so far as I know. The sample clock sync doesn't
work
so well with multiple units, but usually that only matters for stereo. The
BrotherSync part for jamming with multiple echoplexes should work fine.
kim
______________________________________________________________________
Kim Flint | Looper's Delight
kflint@loopers-delight.com | http://www.loopers-delight.com