[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP woes
Some bounce a lot more than others. I totally experienced this with
switches from Radio Shack recently on that very machine I was talking
about for Todd Green. On part if the rig It was an old hardware debounce
that I'd modified from someone elses work to where it worked fine until
the switches got just a little glazed or something and then it started
glitzing and would like 90% of the time perfectly double bounce so that
it was as though the switch just wasn't working.. I don't know the
type of debouncing that's used like I say. Haven't worked on those
units yet. Just...seen stranger things wind up being true and trying to
consider all possibilities. -Bob
Kim Flint wrote:
> At 09:39 PM 1/7/2007, Bob Weigel wrote:
>
>> Hmm...radio shack.... I wonder how well the interface debounces? I
>> don't know the technical aspects of these yet as I haven't had to
>> work on one. But often on interfaces that aren't software debounced
>
>
> of course it has debouncing. Are there any mechanical switches that
> don't bounce? I never encountered one... Debouncing switches is a
> pretty basic digital interface requirement. I would be quite surprised
> to find any device with a switch that wasn't debouncing it somehow.
>
> kim
>
>
> ______________________________________________________________________
> Kim Flint | Looper's Delight
> kflint@loopers-delight.com | http://www.loopers-delight.com
>