[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: EDP woes II
I did open the box Bob and had a tough time getting one screw out so I
couldn't totally undo it. I have a gig tonight (sans EDP but maybe with a
Rang) but tomorrow I'll try and get closer to it to see what it looks like.
If it is cracked, do you have nay idea what the replacement is?
Thanks!
Plish
-----Original Message-----
From: Bob Weigel [mailto:sounddoctorin@imt.net]
Sent: Saturday, January 13, 2007 6:01 PM
To: Loopers-Delight@loopers-delight.com
Subject: Re: EDP woes II
Hmm. Might have taken a hit and you have a cracked poteniometer board.
I could open one and see how they are built. I can't recall. But
likely it's a pc mount pot where either the solder is broken or the
whole bakelite piece or whatever the potentiometer's resistive material
is layed on inside is cracked. -Bob
Michael Plishka wrote:
>Hi All!
>
>The output knob on my Gibson EDP is crackling and cutting in and out.
>When
>I push
>in on the knob it quiets down but otherwise it's nasty. Is seems like
>it's
>much easier to turn than the other knobs as well. I tried some contact
>cleaning stuff I bought at Radio Shack and not really helping.
>
>Thoughts?
>
>Thanks,
>
>Plish
>
>
>
>
>