[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: RC-50 Feedback Issue -- Software Fix?
Hi,
The RC-50 doesn't have 0-100% feedback control like on delay units.
Workaround: you can send the output of a loop (phrase) to the sub-outs. If
you link these with a cable to the aux-in (also stereo) then you have the
ability to control feedback with the aux input level knob.
Example setup
-------------
Phrase 1 => output=SUB, set aux knob to 1/4, overdub mode=replace
Phrase 2 => output=MAIN
Phrase 3 => output=MAIN
However, the aux-in level can't be controlled with an expression pedal. A
workaround for this could be to insert a stereo volume control pedal like
the Boss FV-50. Despite of these missing features, I can say the FC-50 is a
very good and reliable looper for it's price.
Sjaak
-----Original Message-----
From: Domenick Swentosky [mailto:domenick@greytime.com]
Sent: Sunday, February 18, 2007 1:04 AM
To: Loopers-Delight@loopers-delight.com
Subject: RC-50 Feedback Issue -- Software Fix?
I have one more question about the RC-50 if I may.
I'm reading through the archives about the lack of feedback control on
the RC-50 being a big drawback, and I've read through Buzap's solution
to the problem.
I am wondering if this is something that Boss can address in a future
software upgrade, or would they have to issue a new unit? I obviously
have no expertise in this realm, but it seems that many of you do.
Thanks for you time.
Enjoy the day.
Domenick