[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Mixer Send-Return Question (OT?)
Quoting ejyuhas <ejyuhas@earthlink.net>:
> However, when I connect it to my mixer, I get no green signal light,
> lighting up to show me that anything is going thru the Nanoverb.
>
> Am I doing something wrong with my hookups? Balanced or unbalanced
>cables?
> (Currentl;y using balanced for the Send-Return cons.)
A few things to check:
. Is your send-pot turned up?
. Are you plugged into a send or an insert? (inserts work a differently)
. Is your return level turned up?
Start out by trying to get a signal from the mixer (send) to your
Nanoverb. Try a different patch cord (the one you are using might be
broken). Try a different send. Perhaps your send broken. Once that
is working, then patch the Nano into a return. If one return doesn't
work, try another one. Also, switch patchcords.
Check the position of any mute or solo switches, too.
I am not familiar with your specific mixer however these are some
general things to check.
-- Kevin