Graphtech installation was AXON AX 100

[phaslem@wightman.ca]

I looked at both systems, the RMC system is more geared to an acoustic  
type of installation, where as the Graphtech is more like the familiar  
saddles that you use on any electric guitar. The RMC is a much more  
complicated installation and I would only recommend a compentent  
technician do that installation.

The Graphtech system is very modular with a minimal amount of  
soldering. You do have to comfortable enough with wood working to  
route out spaces in the back of the guitar and drill holes for the  
wires from the saddles and controls, but all that is pretty basic  
stuff and reachable by anyone comfortable with cutting holes in their  
instrument. The system is very like putting together a computer as  
every control and even the saddles just plug directly into the circut  
board. I did mine on one Sunday afternoon (that was the Parker p44  
installation). If you're interested I could take some pictures of the  
insides of my guitars that I've installed the system in so that you  
can see what it looks like.

best of luck with it,

Paul haslem
www.dulcify.ca


>
> Hey Paul,
> Just curious,who installed it for you? i tried finding somebody in
> california who would install the Graphtech or RMC system on my fernandes
> sustainer but they all seemed to shy away from doing it.Ive also havent
> found anybody here in germany yet who would do it if anybody has a link
> id aprreciate it!
> cheers
> Luis
>