[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: two amp setups



You could just run a mixer with one amp on the left output and one on the right.  Run your looper on a aux send, return it on a channel and pan it to whatever amp you want.  also pan your guitar signal to whatever amp.

Dave




Date: Fri, 9 Nov 2007 21:48:58 -0600
From: jcshirke@midway.uchicago.edu
Subject: Re: two amp setups
To: Loopers-Delight@loopers-delight.com



Is it possible to set up a looper such that I could have a looped signal run to the JC-120, and play over it with through the Carvin, as well as have just a looped signal going through either amp? 

Another option is to get one of these: www.soundsculpture.com/products/switchblade.htm

You may only need the Switchblade 8B and not the GL. I'm not sure how complicated your rig is, though. You could get the 8B + some (or maybe just 1) Axess Electronics GRX4 Router/Switchers. That would allow you to put 4 devices on a single Switchblade "loop".

Jeff


Send a smile, make someone laugh, have some fun! Start now!