Re: Feedback in Mobius (was: scripting/command chaining)

[Per Boysen <perboysen@gmail.com>]

>> The way it is broken in is that the setting of Alt/Sec Feedback
>> doesn't affect the kept level of old audio layers under additions by
>> Substitute, SUSSubstitute, Replace... (think I got them all there) as
>> it should do.
>
On 13 nov 2007, at 17.34, Jeff Larson wrote:
> Secondary Feedback is another EDP feature I tried to copy, the main
> difference is that it is always accessible, you obviously don't  
> have to
> plug a pedal into a special jack on the back.  You can also configure
> which modes you want it applied to.
>
> It is supposed to be used instead of primary feedback during any
> recording mode (Overdub, Multiply, Substitute, Stutter) where you are
> combining live audio with the current loop contents *and* you have the
> Interface Mode parameter set to Expert or Stutter.
>
> It is not used in Insert mode because there is no old audio to merge.
> It is also not used in Replace mode.  I'm not sure how the EDP handles
> feedback in Replace mode, but it made sense to me to not support
> feedback during Replace because otherwise it would behave exactly the
> same as Substitute.
>
> Apparently this broke somewhere in the 1.30 releases, it is a priority
> but I just haven't been able to do much with Mobius for nearly a year
> now due to several work and family obligations.  The last time I  
> checked
> it was working for me in Substitute so I'm not sure what the  
> problem is.
>
> Jeff


---> First:
Wo-hooo! It's a priority!

---> Second:
It works for me too - sometimes. But mostly not. Can that provide  
some sort of clue?

Greetings from Sweden

Per Boysen
www.boysen.se (Swedish)
www.looproom.com (international)
http://www.youtube.com/pellibox (gritty)