Re:TC Electronic D-two: how to emulate an analog delay?

["L.A. Angulo" <labaloops@yahoo.com>]

hey Sjaak,
I am doing the same thing, putting everything in a
rack to have more floor space and less setup time,the
delays from the DL4 and DD-20 is something i am trying
to replace as well,this is why i was inquring about
the line6 PodXT pro,seems to have a wide variety of
old delay and echo emulations like the DL4 and what i
am also looking at is knobs to turn for manual
manipulation which it also has.The GT pro doesnt seem
to have as many delays but has a little 2.8 sec. hold
sound on sound looper built it.But then again i would
like to compare the sound quality of both.
Luis

--- Sjaak <tcplugin@scarlet.be> wrote:

> Rainer,
> I remember you have a DD-20 as well isn't it? Than
> you probably know what I mean with the DD-20
> "analog" delay. BTw: I do have a DD-20 but I'm
> moving all the FX processing to to a 19" rack so I
> can control everything from my FC-300. I was hoping
> the D-Two could do the DD-20 type of delay but
> unfortunately not. Fireworx can do it but according
> to the manual the max delay time is only 675ms which
> is way too short compared to the D-Two. I know the
> Fireworx is probably one of the best 19" FX modules
> out there but 675ms is a little disappointing,
> especially for a device with this price tag.
> 
> Sjaak
> 
> > Rainer wrote:
> > The FireworX can do that extremely well. I did one
> setup where I put the
> > D-Two via SPDIF in the Fireworx's insert (having
> feedback set to 0) and
> > create a feedback chain in the FireworX using
> resonant filter, modulated
> > delay (as Per explained) and distortion.
> 
> ---
> Scarlet One, ADSL 6 Mbps + Telefonie, vanaf EUR
> 29,95...
> http://www.scarlet.be/
> 
> 


www.myspace.com/luisangulocom


      
____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs