[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Burned by Oberheim EDP... switching to Mobius?





phillip wilson wrote:
  
> I have two Gibson units... a black and a white face unit, that I have 
> been controling from one FCB7 and a a-b switch.....
>  
> I have just added in an Obenheim EDP that will be getting the Loop4 
> treatment as soon as the chips are shipping again, I have just sat 
> yesterday and programmed  three banks on my fcb to control one edp each 
> using source# offsets, i am then going to connect the fcb1010 to edp1's 
> in, have a line coming out of thru and into edp2's in then outof its 
> thru and into edp3's in.
>  
> from what has just been said on tis topic i can see two potential 
>problems.
>  
> 1. the controller set up i am wanting to use might not work due to the 
> time it takes to get the midi control info to the last unit in the chain

Using a midi splitter is the standard way to solve midi chain delay.

The delay with just 2 edps is pretty small, just enough to give you
a Hass effect when you reverse a stereo pair.

You could maybe run edp2 from the Midi Out of EDP 1 to reduce chaining.

>  
> 2. the Obi - edp might not sync to the other two due to crytal 
> incompatability with the two newer units which seem to synch well 
> to each other.

or consider using Midi Sync,

or the EDP Beat Sync.

>  
> If the old obi wont synch can anyone tell me where to get the crystals 
> from here in the uk?

Andy Ewen at Trace Elliot, but don't know if he still has them.

Matthias could give you the part number.

andybutler