|
this worked pretty well for me in a similar situation as long as you didnt leave anything "open" on the first set for instance in my set up I had my home made FCB replacement , then a splitter (A OR B) theneach of these connected into each echoplex via a Y cable , then the spare input of each Y cable being summed back to another echoplex controller via yet another Y cable (controlling A AND B) If I had left one of the echoplexs on overdub then began using the A AND B controller, it obviously began cycling one echoplex overdub on and the others off (which actually once i was awar of it could be REALLY COOL for distributing one signal over a stereo pair) Phill MyOneManBand www.myspace.com/myonemanband > To: Loopers-Delight@loopers-delight.com > From: lochheed@cox.net > Subject: Custom EDP ECHOPLEX Footswitches with Boss Pedals > Date: Mon, 3 Dec 2007 11:59:52 -0700 > > Hello - > > I've converted 7 Boss foot switches to handle the various functions > on my two Echoplexes. The pedals were gutted and fitted with the > proper resistors and wired in series with standard patch cables The > setup works wonderfully! The feel of the Boss switching is more > familiar than the stock EFC-7 and the switches are certainly lasting > longer! In order to cut down the size of my board, I'm using a Boss > LS-2 Line selector as an A/B to switch the custom Boss pedals between > the two Echoplexes. This allows me to control either Echoplex with a > simple switch. Even though the Echoplexes aren't running in stereo, > they are being fed Midi Clock. Both EDPs go to separate amps and are > always looping something different. > > Here's what's next for my setup.... > > I'd like to add a few more of these custom Boss pedals to control the > Record, Mute, Insert and Next Loop for BOTH Echoplexes at the SAME > TIME. Sort of a MASTER Record, Mute, Insert and Next Loop if you will. > > Tell me if you think this scenario will fly... > > After the 1/4" foot switch cable hits the A/B box, the signal splits > two 1/4" cables to the two EDPs. Can I patch in a "Master" Record, > Mute, Insert and Next Loop signal into both these cables? I'll > probably use a small Hammond enclosure as a "merge" box. I'd like to > have the option to not only control the EDPs independently but also > have the option to Record, Mute, Insert and Next Loop for both. > > In theory, it sound like it should work. > > Any thoughts? > > Adam > > http://www.myspace.com/lochheed > > > > Get closer to the jungle. I'm a Celebrity Get Me Out Of Here! |