[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Ableton Live/FCB1010 Midi Mapping Problem



Hi Travis,

Thanks for responding. Actually I just discovered that it was a midi cable going out from my PC into the FCB that was screwing things up. Removing it solved the problem immediately.

However I now have another problem (it never ends) where my various audio recordings do not sync up. However when I play back different audio clips stored on my PC, they all sync up when played back in loop mode. Would you have any idea why this is so? I've been searching everywhere on the net but found no answer and the manual doesn't talk abt my problem

cheers,
Wendy


On Dec 27, 2007 12:58 AM, Travis Hartnett <travishartnett@gmail.com> wrote:
As shipped, the FCB includes a bunch of MIDI messages assigned to each
button (to control the Behringer guitar/bass amps).  You'll want to
zero out all of those before you try to use it with something else.
You can do this manually, but you'll have to do it for each patch, or
you can download the FCB editor and pay them $15 and do things in a
less labor intensive manner.

The FCB "reset to factory presets" function doesn't zero everything
out, in case you were wondering.

TH

On Dec 26, 2007 6:20 AM, wendy phua <wendybassist@gmail.com> wrote:
> hi, i'm very new to the world of midi and live looping, and am having a monster of a headache with a problem in my midi mapping.
>
>
> >
> > Basically i'm using the FCB to trigger off recordings on the fly with Live. I managed to get Live to recognise the FCB1010 and have set pedal 1 (bank 00) to trigger the Track Launch button with pedal 2 stopping the track.




--
cheers,

Wendy Phua
http://www.wendyphua.com
http://www.myspace.com/wendyphua