Re: fcb1010

["Tony K" <bigtonyk@gmail.com>]

> Unfortunately there is no shortcut. For each patch you need to program
> what MIDI events are going to be sent out by the FCB1010. But if you
> don't like to sit for three hours doing this you can try to download a
> computer software editor. I don't have the links but you can find out
> about that over at the FCB1010 mailing list.
> http://tech.groups.yahoo.com/group/fcb1010/

If you have the Uno chip installed (worth the effort to do so) you can
get Ripwerks here..

http://home.att.net/~the-bug/RipwerxFcb1010Editor.html

If you have the original FCB you can use this..

http://www.mtnsys.com/faq-fcb/PCEditorBeta.htm

Tony

On Feb 20, 2008 4:02 PM, Per Boysen <perboysen@gmail.com> wrote:
> On Wed, Feb 20, 2008 at 6:56 PM, topu lyo <topulyo@gmail.com> wrote:
> >  hey everyone
> >
> > was wondering if anyone is familiar with this pedal in use
> > with the echoplex.
>
> Yes, I have been using it with my Echoplex.
>
>
> > i'm having trouble getting expression pedal B to work for volume.
> >
> > also is there a way so i don't have to program feedback and volume
> > for every single pedal any shortcuts?  any advice would be amazing!!
>
> Unfortunately there is no shortcut. For each patch you need to program
> what MIDI events are going to be sent out by the FCB1010. But if you
> don't like to sit for three hours doing this you can try to download a
> computer software editor. I don't have the links but you can find out
> about that over at the FCB1010 mailing list.
> http://tech.groups.yahoo.com/group/fcb1010/
>
> --
> Greetings from Sweden
>
> Per Boysen
> www.boysen.se (Swedish)
> www.looproom.com (international)
>