[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Kaoss pad 3 LED matrix controller idea for LP1
Hi Sjiak,
i'm using a KP2 to control some MIDI fuctions of my looper (Mobius), but
in
a different way.
In my set-up, i have assigned some looper functions to some of the program
buttons (4-8) and to the Motion/Mute button, but just to trigger MIDI
command like "next track", "previous track", "Global Mute", Fade In/Out
scripts, etc...
I have found that volume and feedback are best controlled by a footpedal,
than by my finger moving onto the KP, and I also prefer to have both hands
"on" my keyboard, rathar than make them jump to the KP and back to the
keyboard. So these "crucial" controllers are activated by the FCB1010.
Just my 2 cents...., but let me know if you find a better way to use the
KP
like a midi controller.
Fabio
----- Original Message -----
From: "Sjaak" <tcplugin@scarlet.be>
To: "Loopers-Delight" <Loopers-Delight@loopers-delight.com>
Sent: Wednesday, September 24, 2008 10:44 AM
Subject: Kaoss pad 3 LED matrix controller idea for LP1
Is anyone using a Korg Kaoss pad 3 to control a LP1 or other looper? This
is
what I want: use the touch pad LED's to control the volume and feedback of
LP1 track 1-4.
The idea: if I choose pattern 7, I can setup a 4*2 LED matrix, with each
cell having it's own midi CC message. But I cannot assign the min and max
CC
values here. Or is the min value always 0 and max 127?
---
Sjaak
http://www.livelooping.be/
http://www.overgaauw.be/
http://www.myspace.com/sjaakovergaauw
---
Reeds meer dan 2000 Scarlet klanten betalen geen abonnement meer!
Doe mee en surf ook gratis! >> http://www.scarlet.be/nl/mgm
--
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.7.1/1688 - Release Date: 24/09/2008
6.29