[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Confused when trying to ASSIGN BASIC EDP FUNCTIONS TO FCB1010



There is a setting in the EDP where you can off-set MIDI Note numbers
sent from a MIDI pedal into the EDP. This can be used to move the midi
not control range to the absolutely lowest or highest note range if
you want to make room for playing a MIDI instrument on the same MIDI
channel. It can be useful in other ways too, but if you don't know
about it you may be confused why all the midi notes you send to the
EDP is not affecting the commands you have assigned them too.
"Off-set" is not what it is called in the EDP manual, rather what it
does. Maybe it's called "Note Base" or something in EDP-ish...?

Greetings from Sweden

Per Boysen
www.boysen.se
www.perboysen.com



2009/3/27 mark francombe <mark@markfrancombe.com>:
> On Fri, Mar 27, 2009 at 9:39 AM, Per Boysen <perboysen@gmail.com> wrote:
>>
>> note off-set
>
> Whats that Per? My instructions he followed show that he has to use 
>NOTES,
> but is/was there a note OFF setting I forgot...?