[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP Multiply
I never had that either.
..and I'm often cutting a loop down to one/two cycles.
Multi-Increase ("multiply for a number of cycles") only kicks in on the
3rd
press of Mult.
...or is this connected with quantise?
andy
Matthias Grob wrote:
> interesting. I use multiply a lot and never had this problem.
> but I can easily make this Multi-Inc feature switchable or even trash it
> if no one uses it
> ... for the plug...
>
> On 7 Apr 2009, at 12:30, Ian Petersen wrote:
>
>> Per,
>>
>> When you want to cut down the length of a loop with
>> Multiply you kick it twice. But if you kick with a too short time
>> between the two Multiply kicks the EDP thinks that you want to tell it
>> that you want to "multiply for a number of cycles"
>>
>> Aargh! Yes, that bugs me no end, too.
>>
>> I've found the best way round it is to have a separate
>> Sus-Unrounded-Multiply switch on my FCB, as well as a 'normal' multiply.
>>
>> Ian
>
>