[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Bidule midi question
Thanks to Per and Andy I have now got this working as I wanted, mainly
by using "Midi to Value" with smoothing as Andy suggested.
I've also learned a lot about Bidule in the process!!
Best wishes,
Steve
On 16 Jul 2009, at 14:13, andy butler wrote:
> In addition to Per's post, I'd add.
>
> There's a "bidule" called "Midi to Value" which can convert from
> Midi note to an audio control.
> It has smoothing too... I guess you'll need that.
>
> I'd take the output from that and either link parameters to a Gain
> control,
> or more likely use Building Block>>Maths>>Function and enter "x*y"
> in order to control level of the synth.
>
>
> There's also a "midi note remapper".
> ...and as "Midi Note Filter".
>
> So with those 2 you can decide what range of notes are used
> to control the volume.
>
>
> Probably I'd make a Bidule Group with one Midi input and the
> relevant number of audio ins and outs.
> Then all the wiring is hidden, giving a simple component that
> performs the function you want.
>
> good luck,
>
> andy
>
>
>
> Steve Bingham wrote:
>> Do any Bidule users out there know how I can do the following, as
>> I'm pretty new to the program:
>> I have two midi inputs coming into Bidule from external sources, on
>> two different midi channels. One is connected up to a synth module
>> (Absynth). I would like to use a range of note on values from the
>> other input to control the volume in Absynth.
>> Any ideas welcome!!
>> Thanks,
>> Steve
>