>
> yup saw that. metal switches again.
>
> i don't need the feedback you get from a sprung switch and really want
> something more tactile. seems like there are so many soft pressure
> switches on the market.
>
> i'm excited about a custom job! got lots of replies to my twitter
> posts about it today.
>
> i'm thinking 12 pads in 2 rows that are about 1.5 to 2 inches square
> and fully customizable so i can send MIDI notes, PC messages, OSC and/
> or computer keys.
>
> while i'm in fantasy land....the ability to change the "bank" of the
> pedal with my Kbow...and each pad will light up with 1 of 4 colors to
> tell me what bank i'm in.
>
> not cheap...but possibly worth it.
>
> On Oct 26, 2009, at 7:25 PM, L.Angulo wrote:
>
> > Hi Zoe,
> > I dont know if u are aware of this one:
> >
> >
http://www.youtube.com/watch?v=Hw6mlLt-fvg
> >
> > I just bought one but havent gotten it yet,to replace my bulky
> > FCB1010 it also has the same amount of buttons but half of the size
> > of the FCb is plus it can send any midi comand you can think of.
> > I worte Jeff about the switches since i was concerned about their
> > loudness but he said they are a lot more quiet than in the video
> > because the microphone was place very close to it.
> > check out the other videos as well,you might also ask him if he
> > could customize some switches for you he seems very open,though this
> > unit is not cheap!
> > cheers
> >
www.myspace.com/luisangulocom
> >
> >
> >
> >
> >
> >
> > --- Zoe Keating <
info@zoekeating.com> schrieb am Mo, 26.10.2009:
> >
> >> Von: Zoe Keating <
info@zoekeating.com>
> >> Betreff: monome as foot controller
> >> An:
Loopers-Delight@loopers-delight.com
> >> Datum: Montag, 26. Oktober 2009, 13:41
> >> I just had another switch break on an
> >> FCB1010 and it started sending junk data...just like my last
> >> three FCB1010s
> >>
> >> (p.s. I have the Uno firmware and no I don't want a Ground
> >> Control or anything w/ awful metal switches)
> >>
> >> I'm DONE with this pedal.
> >>
> >> I'd like to find a maker-whiz to build me a custom pedal
> >> from a monome kit.
> >>
> >> One thing I'd like is those same translucent silicone
> >> rubber pads but LARGE (between 1.5 inches and 2 inches
> >> square). Has anyone ever seen any anywhere and know where to
> >> source them?
> >>
> >> thanks much,
> >>
> >> Zoe
> >>
> >>
> >
> >
> >
> >
>