Re: AW: monome as foot controller

[Antony Hequet <antonyhequet@yahoo.com>]

I would also be interested.
Antony

Sent from my iPhone

On Oct 28, 2009, at 12:49 AM, "L.Angulo" <labaloops@yahoo.com> wrote:

sounds great but let us konw once you have it done,tell the bilder if he 
does a goo job for u we might jsut follow;-)
cheers
www.myspace.com/luisangulocom


--- Zoe Keating <info@zoekeating.com> schrieb am Mo, 26.10.2009:

Von: Zoe Keating <info@zoekeating.com>
Betreff: Re: AW: monome as foot controller
An: Loopers-Delight@loopers-delight.com
Datum: Montag, 26. Oktober 2009, 20:08
yup saw that. metal switches again.

i don't need the feedback you get from a sprung switch and
really want something more tactile. seems like there are so
many soft pressure switches on the market.

i'm excited about a custom job! got lots of replies to my
twitter posts about it today.

i'm thinking 12 pads in 2 rows that are about 1.5 to 2
inches square and fully customizable so i can send MIDI
notes, PC messages, OSC and/or computer keys.

while i'm in fantasy land....the ability to change the
"bank" of the pedal with my Kbow...and each pad will light
up with 1 of 4 colors to tell me what bank i'm in.

not cheap...but possibly worth it.

On Oct 26, 2009, at 7:25 PM, L.Angulo wrote:

Hi Zoe,
I dont know if u are aware of this one:

http://www.youtube.com/watch?v=Hw6mlLt-fvg

I just bought one but havent gotten it yet,to replace
my bulky FCB1010 it also has the same amount of buttons but
half of the size of the FCb is plus it can send any midi
comand you can think of.
I worte Jeff about the switches since i was concerned
about their loudness but he said they are a lot more quiet
than in the video because the microphone was place very
close to it.
check out the other videos as well,you might also ask
him if he could customize some switches for you he seems
very open,though this unit is not cheap!
cheers
www.myspace.com/luisangulocom






--- Zoe Keating <info@zoekeating.com>
schrieb am Mo, 26.10.2009:

Von: Zoe Keating <info@zoekeating.com>
Betreff: monome as foot controller
An: Loopers-Delight@loopers-delight.com
Datum: Montag, 26. Oktober 2009, 13:41
I just had another switch break on an
FCB1010 and it started sending junk data...just
like my last
three FCB1010s

(p.s. I have the Uno firmware and no I don't want
a Ground
Control or anything w/ awful metal switches)

I'm DONE with this pedal.

I'd like to find a maker-whiz to build me a custom
pedal
from a monome kit.

One thing I'd like is those same translucent
silicone
rubber pads but LARGE (between 1.5 inches and 2
inches
square). Has anyone ever seen any anywhere and
know where to
source them?

thanks much,

Zoe