[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: new loop strategy
William Walker wrote:
> For the last few months I have been trying to get more comfortable
> with creating ABC (and sometimes D)
thanks for sharing Bill
> The Zoom Q3
> was recording it, warts and all.
Some of the best sound and vid quality I've
seen on a YouTube demo video.
The Q3 is perfect for this.
> here is the Youtube link:
> http://www.youtube.com/watch?v=PE6eydQyHGg
> Enjoy
i did :-)
..and I'm going back again later
> Bill
>
> and the looperlative scripts:
>
> a preset with the following commands:
> select track 1, cue track , except track, stop, select track 1
etc
> You
> begin recording the next section by hitting the select track 2 long
> script preset, which you can do before track 1 completes its cycle, as
> soon as track one ends recording will begin on track 2, so at this point
> you have to be careful of your timing coming in to the track.
Right, so we're in grid time here.
Question: now track 1 is master, will track 2 be recorded to
sync with it even when track 1 is stopped?
> I think you will need version1.37 for this to work.
Yes, the "Except" command is not available in v1.34d.
I found with v1.37 that i had problems with dropouts
at the beginning of a recorded loop ( and this was generally
a sign that the LP1 would end up crashing).
(I suspect this may be due to my use of smaller loops
to create rhythm ala EDP.)
With v1.34d a different approach is needed
as it needs some Groups set up specially.
Group 1: tracks 234
Group 2: tracks 134
Group 3: tracks 124
Group 4: tracks 123
presets with the following commands:
selectTrack(1), cueTrack , selectGroup(1), stop, selectTrack(1)
selectTrack(2), cueTrack , selectGroup(2), stop, selectTrack(2)
selectTrack(3), cueTrack , selectGroup(3), stop, selectTrack(3)
selectTrack(4), cueTrack , selectGroup(4), stop, selectTrack(4)
> I use these scripts when I want to have a beat box track going
> while I switch between other tracks, in this case my group 1 will
> include track 1 as well as track 8 which I use as my beat box track.
the above 1.34d solution would (obviously) work with 1.37.
...and it would allow a beatbox track to be recorded
on track 5 which could be master.
The the Record function would still be initialised.
andy butler
ps.
The new firmware for the Gordius LG2 will
be able to do shortpress/longpress.
e.g. on one switch a short press starts record,
...a longpress erases the loop
That's going to really give the LP1 a boost.