[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Looperlative LP2
Wonder what impedance the LP2 is expecting? I tried an EV-5 on a first generation Ground Control foot controller and it gave me very limited range because it expected a 250k Ohm pedal and the EV-5 was something like 50k Ohm...I then went to a Boss FV-50H pedal and all was right with the world.
Good luck!
From: Pawel Janowski <pjanowski@gmail.com>
Date: Thu, 31 May 2012 11:01:08 +0100
To: <Loopers-Delight@loopers-delight.com>
ReplyTo: Loopers-Delight@loopers-delight.com
Subject: Re: Looperlative LP2
To quickly follow up on the LP2 experience.
I had a few sessions with it at home and I am very happy with the workflow and the sounds I can get from it. The only issue to date is that I haven't had great luck using my Boss EV-5 _expression_ pedal to control feedback. Not sure if I am doing something wrong (the manual is not very detailed on this) or if I need to try a different pedal. Anyone got the feedback control working? What pedal did you use?
In each case I tried multiple mix and input gain settings. In the first case I had the cutoff problem occur every time I hit the strings hard, especially higher up the neck (that's single oil pickups, so nothing too hot) and the only solution was to turn the guitar volume down. In the second case I was unable to reproduce the problem at all.
Maybe LP2 does not like the PP2?