[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Splitting Signal

for info, it was the mtr ps-4


i used it in the back of my rack to split the signal from my triaxis
to my repeater, lp-1, kaoss pad and tc d2

worked like a charm, with no signal degradation or interference

i then used a behringer mixer to blend everything back together


On Mon, Aug 8, 2011 at 10:32 AM, Simeon Harris
<simeonharris40@googlemail.com> wrote:
> I used a simple passive headphone splitter for years. Worked perfectly. 
> Cost
> me 40 quid
> Sim
> Sent from my iPod
> On 8 Aug 2011, at 02:50, Phil Clevenger <phil.clevenger@gmail.com> wrote:
> (sorry if duplicate post, mail gremlins here...)
> Hey Loopfolk, seeking some product advice.
> Currently I'm taking mono send from my Mesa Boogie Mark IV's effects 
> loop,
> out to multiple loopers (EDP, LP1, Repeater), and back to the Mk4's 
> stereo
> returns, summed to stereo via (at the moment) a little Mackie 1202 mixer.
> For now, I'm splitting that mono send into multiple looper inputs plus 
> dry
> signal direct into mackie via a less than optimal Morley ABC box setup...
> but it's noisy and a little bejankety :)
> I've seen a lot of talk here about mixers, but not so much about 
> splitters:
> how to take one mono send and feed that to multiple inputs....
> I am looking hard at this (costly) unit from
> Radial: http://www.radialeng.com/di-jd7.htm
> Anyone have experience with it? Are there cheaper alternatives anyone 
> might
> recommend?
> Phil :)