Support |
Vortex JamMan footswitch by mail order (or Maplin stores, UK) Maplin Electronics (world service) tel +44 (0) 1702 554000 order code YK75S Double foot switch inc VAT £12.25(UK sterling)+pp (credit card ordering) I've just found this in the catalogue, it's made by Re-an and is the same unit that lex supply . But its supplied as latching (easily convertable to non-latching they say) . This is how You'll need a good medium sized phillips screwdriver and pointy ended pliers i) remove bottom plate, (two central screws) ii) remove plastic nut from jack socket iii) lift out circuit board iv) now the fiddly bit, you'll see a small part of the switch which is made from silver colored wire and wiggles from side to side when you press the switch. grab the end of this which is nearest to the jack socket with the pliers. You now need to pull away vertically until the end you have hold of comes oout of its hole, without pulling out the other end. Now twist to one side and release so that the end you have hold of falls back along side of the switch. It's easy to do but hard to explain without pictures. also replacement switches for above order code FH67 (same source). These aren't actually that good but they are what lex use and I don't know oof another. Andy Butler.