Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: splitting a guitar signal?

"Your tone will suffer" being the operative phrase in these replys to your
splitter question! Over here @ "STANITARIUM" we have tried every splitter 
on
this planet and if you are  talking about a guitar signal,we have never
found anything that doesn't in some way deterioate that signal.That said we
remain humble in our search.When the word "cheap" enters into this CHEAP is
what you get! Let your ears be the judge...always searching...STANNER

----------
>From: the Reverend Rob <reverendrob@realm-of-shade.com>
>To: Loopers-Delight@annihilist.com
>Subject: Re: splitting a guitar signal?
>Date: Sun, Nov 28, 1999, 5:28 PM
>

> On or around 07:13 PM 11/28/99 -0500, Peter Shindler said:
>
>>I want to split my guitar signal and run it into two delay pedals so I 
>can
>>have two independent loops running against each other.  What do I need to
>>get in order to send the signal in two different directions?
>
> I don't know what pedals you're using, or if they have a direct out.  If
> they do, it's extremely simple.  Run one direct/dry out into the next 
>unit.
>
>> If there's more than one way, what's the cheapest solution?  Thanks.
>
> The "cheapest" solution is to get a y-cable splitter and fork the signal.
> Your tone, however, will likely suffer.  Personally, I'd recommend a 
>cheap
> 4-track mixer or something equivalent to split the signal if your delay
> units don't have a direct/dry out, or consider one of the a/b/a+b channel
> switchers on the floor.
>
> Your mileage will vary; I use rack delays with dry outs, so I've never 
>had
> to contend with this. ;)
>
> ==
> the Reverend Rob  ICQ: 1280871      Yahoo: theReverendRob
> ==============================================================
> http://www.realm-of-shade.com/music
>
>