Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Two EDPs one feedback pedal



2 EDPs with one switchable feedback pedal.

I'm looking into modifying a Boss FV-50L stereo vol pedal for this 
function.

Is there not an issue with the EDP only deciding if it has a pedal on 
power 
up?
Certainly is with Loop3 , as the Loop/Delay=Out is only available on power 
up.

Using different MIDI channels with Loop3, wouldn't that mean using a MIDI 
splitter to both EDPs instead of chaining.
(apparently not an issue in LoopIV,)  

And will the panel feedback control be deactivated if the EDP thinks it 
has a 
pedal?

I have an idea to put a switch (maybe 2) on the FV-50L and rewire it for 
the 
so that each EDP is routed to either its pedal pot or full feedback.

Might try to use the pot on the side of the pedal as an alternate 
controller.

Won't have time to do this for a couple of weeks at least, but would 
appreciate any feedback on this, and will report back.

andy butler