Re: OT: Eventide H3500 question

["Italo De Angelis" <italoop@libero.it>]

Hi Greg
a few tips from the factory:
INSTRUMENT/LINE levels are selectable ONLY INSIDE THE UNIT.
UNPLUG power then open top cover. The manual shows you how to set 2 
jumpers to get line level vs. instrument level.
The amp should have a decent line level send, hopefully.
Also you should have a Y cord feeding both inputs, since algorithms can 
be very difeerent input-wise.
When using "old" dsp technology, the best results come from setups with 
splitters/mixers; they help a lot to keep levels hot and clean.
Eventide has a Customer Support/Forum on Yahoo groups.
Join it at EVENTIDE HELPS : http://groups.yahoo.com/group/eventidehelps/

best regards
Italo De Angelis


> Anyone with an Eventide H3500 or equivalent.
> 
>    I'm having a heck of a time getting a decent signal from my 
> Mesa/Boogie Nomad 45 f/x loop, to the Eventide. I reallllly have to 
> crank it up just to get a low signal showing up at the H3500. It is th
e 
> first box in a chain that consists of;
> 
> Nomad-send
> Eventide Ch 1 in
> D-Two Delay
> Echoplex
> Nomad-return
> 
>    Anyone have good tips on hooking up to the Eventide?
> 
> Thanks!
> -Greg
> 
> 
> -----------------------------------------------
> Greg Kucharo
> www.mutantaudio.com
> 
> 

___________________________________________
Italo De Angelis
Preset Design Engineer - Audio Division
italo@eventide.com
EVENTIDE AUDIO CUSTOMERS SUPPORT
http://groups.yahoo.com/group/eventidehelps/