Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: A/B switch for Echoplex



I  use the Morley ABY box for this.  Works fine when in A *or* B only
setting, ie, pointing the footswitch at one Echoplex at a time.  When using
the A *and* B mode, Record and Overdub work simultaneously on both EDPs, 
but
above that (Multiply, Insert, Undo, etc), you get strange results.  No
worries tho, because I just "link" the EDPs via ControlSource when I want
them to work simultaneously (stereo operation).  In the linked case, I set
the Morely box to the A position, where my master EDP controls both.

The Morley box has LEDs to indicate what's what, and runs a long time on a
single 9v battery.

Hope that helps.

Doug
----- Original Message -----
From: "Mark Hamburg" <mark_hamburg@baymoon.com>
To: "Looper's Delight" <Loopers-Delight@loopers-delight.com>
Sent: Saturday, August 24, 2002 12:31 PM
Subject: Re: A/B switch for Echoplex


> I think I tried it very briefly and it worked, but I ended up returning
the
> A/B switch because it was too confusing without some indication of 
>whether
> it was going to A or B. For people who've done this, I'd like
> recommendations on what A/B switches have worked well. (I know. I could
> start drilling holes and making my own footswitch...)
>
> Mark
>
> on 8/24/02 10:15 AM, Laurent Brondel at laurentbrondel@earthlink.net
wrote:
>
> > Hello, has anyone tried to control 2 Echoplexes with a single 
>footpedal?
I'm
> > trying to use a simple A/B box between a single footpedal and 2
echoplexes
> > and only one side seems to be working (A/B box works fine in other
> > contexts). Is there a resistor to place somewhere, ground issues,
another
> > solution? I wish to use both echoplexes independently without floor
clutter.
> > Thanks!
>