Support
Looper's Delight
|
Support |
|
|
First of all, check the Echoplex FAQ at Looper's Delight. There is a whole section on how to connect two echoplexes together as a pair. There is another whole section on multiple loops. Make sure you have them connected together properly as described in the FAQ. To me this sounds like your problem. here is the top level FAQ link: http://www.loopers-delight.com/tools/echoplex/FAQ.html here is the stereo echoplex FAQ link: http://www.loopers-delight.com/tools/echoplex/FAQ4.html here is the multiple loops FAQ link: http://www.loopers-delight.com/tools/echoplex/FAQ9.html Beyond that, if you are still having trouble you need to supply more information for us to help you. How the are units connected together, the parameter settings, how you are controlling them, the specific sequence of actions you are trying to do, etc. kim At 05:04 PM 2/9/2003, you wrote: >I use 2 EDP's > >I set both to do 3 loops... > >Whenever I toggle through and do anything, the two units are never >synched >up again once leaving the initial state they are in when both have their >first loop rolling... > >Anywhere I can read how to remedy this? > >What I HOPE to achieve is an A/B/C type option of song phrasing... ON >BOTH >UNITS... > >I want the units to stay in sync AT ALL TIMES so from the listeners >perspective there is nothing to notice except good music? > >If anyone can enlighten me or point me in the right direction... I would >sincerely appreciate it. ______________________________________________________________________ Kim Flint | Looper's Delight kflint@loopers-delight.com | http://www.loopers-delight.com