Re: Syncing Echoplex with JamMan?

["Chris Payne" <soundboot@o2.co.uk>]

We played around with trying to sync these two machines but didn't get
anywhere! Can somebody walk me through it? I tried it both ways but one
didn't seem to affect the other much. So for using the Jamman as master I
have sync in on the EDP plus set the 8th note cycle. What else do I need to
do? When things are linking right should I expect to be using overdub or
record once the loop duration has been set by the Jamman?
Thanks
Chris

----- Original Message -----
From: <SoundFNR@aol.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Wednesday, August 20, 2003 3:48 AM
Subject: Re: Syncing Echoplex with JamMan?


> > Hi all, newbie here!
> >  I have an Echoplex and will be playing with somebody who has a JamMan.
Has
> >  anybody had experience syncing these together? What can I expect and
what
> >  can't I expect?
>
> the (original software) JamMan glitches at the loop start when used
> as a slave, but this might not be a problem for you.
> .........maybe better to use JamMan as master because of this.
>           (which would mean EDP sync=In)
>
> The JamMan note number needs to be half the 8th/cycle no.  of the
> EDP if you want the JamMan loop length equal to the EDP cycle length.
>
> You can Multiply your EDP and stay in sync.
>
> If your friend uses delay mode on the JamMan (which is the way
> to get feedback control) then you can't sync.
>
> have fun
>
> andy butler
>