Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: AudioMulch LiveLooper & CannonLooper...



I don't know whether something similar to this would work or not, but I
recorded a loop in the MPC 1000, with overdub turned on.  At the same time,
I was recording it via midi in Cubase SL, but not in loop mode. While the
MPC was recording the layering loop, Cubase was recording the process in a
linear fashion.  I assume the same could be done with incoming audio, but I
haven't tried that yet.

Tom

***************************************************

-----Original Message-----
From: mjnoble [mailto:not8ohm@iinet.net.au] 
Sent: Wednesday, February 18, 2004 9:06 PM
To: Loopers-Delight@loopers-delight.com
Subject: Re: AudioMulch LiveLooper & CannonLooper...

Jesse Ray Lucas wrote:

>Anyone have any luck getting these to work for music?
>
>I just downloaded.  I don't quite understand the interface, and there are
no
>docs.  The website indicates they were "included by accident."
>
>Just got a laptop.  2.4gHz, P4, running a MOTU 828mkII.  Latency: 2.9ms @
>44.1kHz.  Pre-processing loops with a Yamaha A5000 sampler-as-effects-box,
>and trying to post-process with AudioMulch.
>
>It would be neat to be able to bounce loops to AudioMulch from the EDP...
>
>-J
>
>
>
>
>  
>
Hi Jesse,

Your setup seems very similar to myself, except I'm not using a laptop.  
Have been using AM to process the EDP's loops, as well as using the 4 x 
40 second midi synced delays of my Korg Oasys.  You can get some real 
mayhem going on, but some sweet things start happening when it gets 
under control. 

Are you on the AM mailing list.  Lots of excellent tips there, and some 
info about the looping contraptions, but not much.  Basically these 
contraptions are in an alpha state according to Ross, the one-man team 
behind audiomulch.  In otherwords, they are very raw.  I recall from the 
mailing list that they need 512mb of ram just for those contraptions.  
As for how they function, your guess is as good as anyones until Ross 
gets around to producing some docs.

Anyway, good luck with figuring those loopers out. 

cheers

Michael