Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP record foot switch acting up



Thanks for the info Ted, I'll give the Mouser people a go. If they can send
the switches by US mail it shouldn't be too expensive

Thanks,


----- Original Message ----- 
From: <ArsOcarina@aol.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Saturday, April 03, 2004 8:18 PM
Subject: Re: EDP record foot switch acting up


> Hi there,
>
> It sounds all too familiarly like a problem with the switch itself.
"Record"
> is the one that gets the most use/abuse so it's not too surprising that 
>it
> goes first. I've replaced a few over the years.
>
> Try Mouser Electronics Part# 10PA005
>
> View it on their website at:
>
http://www.mouser.com/index.cfm?&handler=data.listcategory&Ntt=*10pA005*&terms=10pA005&Dk=1&D=*10pA005*&N=0&crc=true
>
> They're a little more than $1 US from Mouser. I bought a bag of 20 from
them
> for around $17 a few years back -- which I figure will be a lifetime
supply. I
> have no idea what the exchange rate will be for you (or if there are
> import/customs duties to figure in). But they're not too hard to replace
if you are
> the least bit handy with a soldering iron. Buy a few extras  and keep 'em
tucked
> away for future emergencies.
>
> Good luck.
>
> tEd ® kiLLiAn
>
> http://www.pfmentum.com/flux.html
> http://www.CDbaby.com/cd/tedkillian
> http://www.guitar9.com/fluxaeterna.html
> http://www.indiejazz.com/ProductDetailsView.aspx?ProductID=193
>