|
go to your local electronic shop. they have a spray which drys almost on contact. I think its freon. Just tell them that you need the spray for dirty faders/controls. They should have it at radio shack. you dont need to hit it with much. as you spray mov ethe control.
SE Help
First Eval' Help.....Click Below
Real Producer Tutorial
Encoding Specs (dynamic tool)
Free Player URL
Enterprise Player Guide
-------Original Message-------
Date: 10/05/04 10:07:10
Subject: RE: WD-40
>>This is seriously NASTY stuff! Use it to lube your squeeky door hinges<<
I would concur that wd40 shouldn't be used to clean electronics, especially where anything more delicate than steel is likely to be exposed to the fluid, but it should also be noted that wd40 is NOT a lubricant either. it's a solvent. after a mechanical joint has been freed up with wd40 & elbow grease, it should be oiled properly.
I once used it to remove magic-marker ink from a crystal watch-glass- it's good for that sort of thing, & I could see why folks might assume it could be useful for contact-cleaning.
d.
***************************************************************************
CONFIDENTIALITY NOTICE
The contents of this e-mail are confidential to the ordinary user
of the e-mail address to which it was addressed, and may also
be privileged. If you are not the addressee of this e-mail you may
not copy, forward, disclose or otherwise use it or any part of it
in any form whatsoever.If you have received this e-mail in error,
please e-mail the sender by replying to this message.
It is your responsibility to carry out appropriate virus and other
checks to ensure that this message and any attachments do not
affect your systems / data. Any views or opinions expressed in this
e-mail are solely those of the author and do not necessarily
represent those of MTV Networks Europe unless specifically stated,
nor does this message form any part of any contract unless so stated.
MTV reserves the right to monitor e-mail communications from
external/internal sources for the purposes of ensuring correct
and appropriate use of MTV communication equipment.
MTV Networks Europe
***************************************************************************
| 
