Support
Looper's Delight
|
Support |
|
|
|
Sorry for the off topic, but I cant find this help
from anyone else, you guys are the best tech-heads...
I have a Korg MS2000R Synth, and I have started to
send the output of my loopers thru the Audio Input for mangling... etc. However,
The sound Im getting out of the synth is somewhat quiet, in comparison to the
synth patches. If I boost the input level knob on the synth, it
distorts.
I am feeding the synth the signal from the "direct
outs" from my behringer mixer. (via a patch bay)
I am wondering what I can do about this..
Is this an impedance thing? Im afraid I dont
understand any of this, but Ive copied the tech spec for the inputs to the synth
HERE:
Inputs: AUDIO IN 1, 2, Level switch LINE / MIC, [AUDIO
IN 1, 2(LINE)]Input impedance = 39 k-ohms, Maximum output level = -3.5 dBu
(Audio In knob maximum), [AUDIO IN 2(MIC)] Input impedance = 22 k-ohms, Maximum
output level = -33 dBu (Audio In knob maximum), Input source impedance = 600
ohms
Now, I dont undersand any of this, if I boosted the
signal BEFORE the synth, would it help? I dont see why. The sound is plenty loud
enough if I boost on the synth, just it gets distorted...
Any one else doing this?/using ms2000r?
Help
Mark
|