Support |
The previous Aspen Juicebox on the Tonepilkot site has been discontinued for quite some time. A new production run with several updates are ready to start. Check this thead for some more info at the Gearpage forum. "5 Isolated outputs (4 DC and 1 AC): 2 x 9vdc @ 500ma each with 4 standard tip neg jacks (the first jack on each of the 9vdc ISO's have a VBat circuit) 1 x adjustable from 4.5 - 21vdc @ 250ma with 2 tip neg jacks 1 x adjustable from 7.5 - 24vdc @ 250ma with 2 tip neg jacks 1 x 12VAC @ 1.5A (Line 6 POD XT, H&K, Digitech, etc.....) We retained the 120vac / 3 prong aux jack on the back as well The two built in VBat circuits and all DIP switches for setting voltages are on the front panel! The enclosure is all sheet metal (designed by me) and is rugged as heck....much sturdier than our old enclosure. OK - Pricing will be between $239 - $249 with your choice of 10 molded power cables (one right angle to one straight.)" http://www.thegearpage.net/board/showthread.php?s=21e069a8dec377851d2d186d875230d5&threadid=72257&highlight=juicebox ------------------------------------------------------- A couple of other power supplies; Italien Masotti PW-4 PS! Will custom make according to spesific needs. "PW4 is the solution to ground loops problems in complex pedalboards and it is developed in cooperation with professional guitar players. Each channel is filtered and stabilized separately and there is a total isolation between the outputs. Since current capability of the channel is redundant (consumption of an analog effect like TS9 is a few mA, while a digital pedal is about 50-60mA), PW4 is useful also for more than four effects. Of course you loose total absence of loops but, in most cases the four isolated outputs allow to avoid hum and noise presence in the signal. Due to large current room, each channel has two connectors to power directly eight effects with standard cables. Isolation between channels allows to have a 18V out with a special cable delivered upo request. Furthermore, we can ship PW4 with any standard voltage (5,9,12,15 or 18V) in one channel free of charge. For special needs we can modify a channel with a continuous voltage regulation." http://www.masottiamp.it/std-pw4.html Cioks Cioks Double Jack Power adapter for pedals 5x9V and 2x12V outputs (230V only) more » Price: 99.41 EUR Cioks Big John Power adapter for pedals 7x9V outputs (230V only) more » Price: 89.00 EUR Cioks Booster Flex 9-18V Flex cable with built-in 9 to 18V step-up voltage converter. A simple way of using a 9V output for powering an 18V pedal. Price: 40.00 EUR . Plus cusatom poer cables, split cables etc. http://www.custom-sounds.com/epages/customsounds.storefront/42438ee902890d8a2741d94dcd01067c/Catalog/1022 http://www.cioks.com/ ---------------------------------------------------------------------------- ----- Original Message ----- From: "Jeff Shirkey" <jcshirke@midway.uchicago.edu> To: <Loopers-Delight@loopers-delight.com> Sent: Friday, March 25, 2005 4:46 AM Subject: Re: one name, many different products Re: Re:AC adapters > >Aha! > >Here's the source of the confusion... mine is a Dunlop, the bright >orange > >one. Dunlop stole the name "Juice Box" from DOD, and Aspect then stole >it > >from Dunlop. > > Right...here's the product I was referring to: > > http://www.tonepilot.com/product.asp?ProductID=164 > > I think it's probably the best product on the market currently. > > Jeff > > >