Support |
well, since i spent all day on monday doing this... 1) make sure you've got the FCB1010 and the Repeater communicating on the same channel. I think the footswitch default is set to channel 1. If so, all you have to do is make sure the back of the Repeater is set to Ch 1. 2) the PC numbers in the Repeater manual are indeed one number off. So..for example, it says "Record" = 3, but actually "Record" = 4. (fun!) record -> 3 = 4 undo -> 1 = 2 loop multiply -> 0 = 1 etc... 3) the CC numbers are what they say they are. 4) as for mapping, there are a lot of ways to think of it. i find it useful to think of one specific piece of music i'd like to do, and map out what actions on the repeater will make the music. then, i write those actions down and group them by which one occur most often. the resulting groups i turn into presets on the FCB1010. i use a different bank on the FCB1010 for each song. presets #1 through #5 are always the same on each bank, since i use them the most and would get confused if they moved around! the other presets change depending on the song. so for example: #5 has the following things in it: record (PC 4) + feedback level (CC 11 with value = 90) the #5 preset on bank 02 has the same thing but with a different feedback level. #4 : undo (PC 2) (it's great to have record and undo next to each other!) I haven't had a lot of success with the expression pedals. They are hard for me to reach and control when I'm sitting down. And I find it too easy to screw up if I leave the pedal in a middle position and then move to another preset. On Apr 7, 2005, at 5:05 PM, Garrett Petters wrote: > I am having problems setting up the FCB1010 to control the repeater. > Does any one have any suggestions? > I would like to control the volume of each track with the expession > pedals and select the track to record on and mute the track, tap > tempo, track effects. > Or any other useful features. > Any help would be greatly appreciated. > > Garrett P > > _________________________________________________________________ > Don’t just search. Find. Check out the new MSN Search! > http://search.msn.click-url.com/go/onm00200636ave/direct/01/ > > >