Re: Loopers-Delight-d Digest V05 #430

[jeremy <listing.to.port@masse.org.uk>]

There's a handy Excel spreadsheet that sets out all the EDP MIDI commands:

PLEX_MIDI_COMMANDS_2.xls

Can't remember where I found it (probably on Loopers-Delight). Can forward
it to you if you like.

Best wishes

Jeremy


http://www.masse.org.uk









> From: <loopdelightml@nosuch.biz>
> Date: Thu, 14 Jul 2005 00:47:50 +0200
> To: <Loopers-Delight@loopers-delight.com>
> Subject: RE: Changing EDP Parameters via MIDI
> 
> Hi Kris
> It's not such a big deal to set up presets on the EDP. I have one that I 
>use
> for the Insert=SUB quantized and one non quantized.
> Other solution: On the PMC-10 you can assign arbitrary MIDI-Strings to be
> sent on a button down and other arbitrary MIDI-Strings on button up.
> I don't know about the Behringer FCB1010.
> Bernhard
> -----Original Message-----
> From: Hartung, Kris [mailto:kris.hartung@hp.com]
> Sent: Mittwoch, 13. Juli 2005 23:00
> To: Loopers-Delight@loopers-delight.com
> Subject: Changing EDP Parameters via MIDI
> 
> Can anyone point me to a primer on if, and how to change parameters on 
>the
> EDP via MIDI?  Rick has me experimenting with Insert=SUB with quantize 
>set
> at 8th notes, which generates some cool effects, but normally when I 
>play I
> want quantize set to OFF.  Can I send a MIDI signal to the EDP to change
> quantize to 8th notes, perform the Insert magic, and then turn the 
>quantize
> back to OFF? I suppose this will take three button pushes on my FCB and
> consequently take up three more buttons on the unit….
> I suppose I could create a preset on the EDPs with these Quantize 
>settings,
> and select that with a program change, but I was hoping to avoid the 
>work of
> setting that up.
> Kris