Support
Looper's Delight
|
Support |
|
|
I am using EnergyXT. I have Plogue and Chainer too, but I like EnergyXT better. I'll re-download the VST and try again. Kris ----- Original Message ----- From: "Chris Kline" <contact@chriskline.com> To: <Loopers-Delight@loopers-delight.com> Sent: Sunday, February 05, 2006 3:40 AM Subject: Re: Product spam: Loopy Llama 0.91 released! > FYI: the version from last week worked differently - it would only >respond > to maximum values (127 or 7F) from a controller - except the record >button > (it made sense at the time). The one released yesterday allows any midi > value for any button, so it should work for you now. > > What host were you using? > > > Chris > http://chriskline.com > >> I wish it had MIDI learn! If someone could try out mapping a note send >> to >> the Clear button, this would be great. I'd like to know if it is just my >> system. My Behringer sends the same button note command to Mobius and >> triggers functions no problem, so I don't know why it wouldn't work with >> Loopy Llama. Again, Record works fine. >> >> Kris >> >> ----- Original Message ----- >> From: "Kris Hartung" <khartung@cableone.net> >> To: <Loopers-Delight@loopers-delight.com> >> Sent: Saturday, February 04, 2006 3:24 AM >> Subject: Re: Product spam: Loopy Llama 0.91 released! >> >> >>> I'm glad you mentioned this. You jogged my memory. I downloaded >>> LoopyLlama >>> last week (new version), and I think it is a really nifty program for a >>> basic looper. I was able to get it going with my Behringer in no time, >>> using the DL-4 preset. I thought it would be cool to use both it and >>> Mobius in some clever fashion. :) >>> >>> I think it is a great software alternative for current DL-4 or JamMan >>> users. Does the DL-4 preset also function like a JamMan? I don't know >>> much >>> about the JamMan. >>> >>> I stil need to experiment with the program, however. I discovered >>> reverse, >>> no problem. What other nifty features can it do while in the free, >>> un-quantized looping mode? For some reasons, I could not map my >>> Behringer >>> to the CLR or Clear button using a note send. Record works fine, but no >>> dice on Clear. >>> >>> Kris >>> >>> ----- Original Message ----- >>> From: "Chris Kline" <contact@chriskline.com> >>> To: <Loopers-Delight@loopers-delight.com> >>> Sent: Saturday, February 04, 2006 3:03 AM >>> Subject: Product spam: Loopy Llama 0.91 released! >>> >>> >>>> Hey everybody, it's been a while since I announced a Llama release >>>> here, >>>> but this one's got some new features that may interest you. It now >>>> allows >>>> you to make "quantized" loops when synced to the host or listening to >>>> the >>>> internal click track. Your timing can be way off and the loop length >>>> will >>>> still be perfect - it takes the learning curve down a notch for live >>>> looping IMO! (As long as you aren't so off that it thinks you wanted >>>> an >>>> extra beat). I am my only tester and it's really changed the way I >>>> perform with it, but I'm curious to see what you pundits think! >>>> >>>> Also, it can save and load loops now. It's got a few other features, >>>> but >>>> the rest is standard stuff. As always it's Mac and Windows >compatible. >>>> Info is at http://www.rekliner.com/?PageID=14, download is at >>>> http://www.rekliner.com/?PageID=13. >>>> >>>> The only recording I have featuring it is the ambient loop (not drums) >>>> that runs throughout http://satelliteband.net/mp3 >>>> >>>> Cheers, >>>> >>>> >>>> Chris >>>> http://rekliner.com >>>> >>>> >>> >>> >>> >> >> >> > > >