Support
Looper's Delight
|
Support |
|
|
Hi Rune, if it can help, here is my latest setup and a brief intro: After one year of analysis before switching my "hardware-just" setup to a hw/sw one, the following set up is what I consider the best solution combining my hardware and a light software for real time processing, looping and routing control. Eventide Orville Tc Electronic Fireworx Boss Vf1 Rme FF800 ( will be substituted by a FF400) Rolls Midiwizard foot controller with 5 continous pedals Doepfer controlfader ( 16 midi faders) Laptop The sw application in which all midi/audio routing and Mobius hosting happen is Usine. Audio input enters via Fireface inputs 1/2 ( 1 for mic, 2 for gtr). All the hardware effectors are connected via analog or digital connections to the Fireface ( in and out). The input is split to the 4 ( Orville is a double stereo processor) stereo outputs that go into the respective hardware processors. Their outputs come back to the Fireface inputs. Fireface sends a mixed master output from channels 9/10 ( potentially you could get crazy with multichannel settings here !) There is no dry signal going to master out. I have the chance to "feed" any single processor using 4 of the continous controllers for parallel processing. Mobius is on an "aux track". I have set ( not yet honestly, but I will do it tomorrow) things so that: There is a crossing midi control that shifts the Fireworx from being processing the main input or Mobius output ( one single control to avoid feedbacks). I can send the Vf1 out to feed Orville second processor ( default setup) or keeping them separate, each one fed by main input. Other midi controls are used for single processors outputs and to control their espective algorithm parameters. This is what I was looking for. The widest control over signal flow and a good user interface, to allow live use be musical and not scientifical. In this way I am using an audio interface and a laptop instead of two echoplexes ( and still feeling having not enough) and a Sound Sculpture Switchblade router/splitter, great but: 1) analog, 2) not deep as a sw matrix). I've sold my echoplexes and my Switchblade is on sale now. Now, this set up is under test of reliability ( knock on wood). best, luca rune fagereng wrote: > Hi ! > > Gear-setup, liveplaying (PA), liverecording. > > I will try explaining with my poor english. > > I play guitar. I uses my repeater into my two amps fx-rute. I do this > to get some kind of stereosound. Both on my loops and on my > guitar-leads. I do like the sound. > > What I miss: > I would like to play live, and still be able to record the loops and > my more regular guitarplaying into different tracks (live). I could > buy more amps... > > Do you guys have some gear-setup tips ? > > I would like all my guitareffects be able to go into the loops, and > still be abel to seperat my loops and my additional guitarplaying, and > maybe still have my guitarplaying in stereo. For pic and > sound http://www.runefagereng.com/hobbies.htm > > What kind of setup do you guys use and why ? > > > > best regards of Rune F. > > > > www.runefagereng.com > Mail:rune_fagereng@yahoo.no > Mob: 917 95 867